E-005,E-008,E-010,E-015,E-020,E-030,E-040,E-060,E-080,E-100,電動執行器
E-160,E-200,E-300,
1．概述Summary
“E”系列電動執行器用于控制0°～270°旋轉的閥門及其他同類產品，如蝶閥、球閥、風門、擋板閥、旋塞閥、百葉閥等，可以廣泛應用于石油、化工、水處理、船舶、造紙、電站、供熱供暖、樓宇自控、輕工等各行業中。它以380V/220V/110V交流電源為驅動電源，以4-20mA電流信號或0-10V DC 電壓信號為控制信號，可使閥門運動到所需位置，實現其自動化控制，*大輸出扭矩達4000N·m。
The series of "E" electric actuator is used for controlling 0°～270° rotation of the valves and other similar products, such as butterfly valve, ball valve, damper, flapper valves, cock valves, etc. It’s widely used in petroleum, chemical, water treatment, shipping, paper making, power plants, heating, light industry and other industries. It drives by 380V/220V/110V AC power. Control signal is 4-20mA current signal or 0-10V DC voltage signal, enables move the valve to the desired position, achieving its automation, maximum output torque is up to 4000N·m..
2．性能特點Performance Features
2.1殼體Shell
殼體為硬質鋁合金，經陽極氧化處理和聚酯粉末涂層，耐腐蝕性強，防護等級為IP67，NEMA4和6，并有IP68型供選擇。
The shell is made of horniness aluminium alloy, pass through anodic oxidation treatment and polyester powder coating, so it has strong corrosion resistance. Protection grade is IP67,NEMA 4 AND 6, and optional IP68 type.
2.2電機Electric Machinery
全封閉式鼠籠式電機，體積小，扭矩大，慣性力小，絕緣等級為F級，內置過熱保護開關，可防止過熱損壞電機。
Fully enclosed Squirrel-cage electric Machinery, small volume, large torque, and small inertia force, F-class insulation rating, inside hot protection switch, avoid damaging the electric machinery.
2.3手動結構Manual Structure
手柄的設計保證**可靠、省力、體積小。不通電時，扳動手柄可進行手動操作。不用手動時，將扳手置于扳手夾內，方便使用。
The design of handle ensure safe, reliable, labor-saving, small volume. When it don’t have electricity, it can be manually operated by handle. When you don't operate by manus, you can put the spanner in the spanner folder, then you can easy to use it.
2.4指示器Indicator
指示器安裝在中心軸上，可以觀察閥門位置。透鏡采用凸出鏡設計，不積水，觀察更方便。
Indicator installs in the center axis, so it can observes the valve position. It adopts convex mirror design, no cumulate water, more convenient to observe.
2.5干燥器Space heater
用來控制溫度，防止由于溫度和天氣變化導致執行器內部水分凝結，保持內部電氣元件的干燥。
It is used for controlling temperature, avoiding internal moisture of electric actuator condensed because of the changing of temperature and weather,keep inner electric device dry.
2.6密封Sealing
密封性好，標準產品防護等級是IP67，并可選IP68防護等級。
Good sealing performance, and the protection class of standard product is IP67, and optional IP68 protection grade.
2.7限位開關Limit switch
機械，電子雙重限位。機械限位螺釘可調，**可靠；電子限位開關由凸輪機構來控制，簡單的調整機構能**并方便地設定位置，且不受手輪過量的影響。
Mechanical, electronic double limit. Mechanical limit screw is adjustable, safe and reliable; electron limit switch is controlled by the cam mechanism, easy adjustment institutions can set the position accurately and conveniently, and it doesn’t affect overly by handwheel.
2.8自鎖Self-locking
精密的蝸輪蝸桿機構可高效傳輸大扭矩，效率高，噪音低（*大50分貝），壽命長；有自鎖功能，防止反轉，傳動部分穩定可靠，無需再加油。
Exact worm and worm gear can efficiently transfer large torque, high efficiency, low noise (max. 50 dB), long life, and it has self-locking function to prevent the inversion, transmission part is stable and reliable, no need to add oil.
2.9防脫螺栓Anti-off bolt
拆除外殼時，螺栓附在殼體上，不會脫落。
When removed the shell, the bolt would be attached to the shell and didn’t fall off.
2.10安裝Install
底部安裝尺寸符合ISO5211/ DIN3337國際標準，孔成雙四方形便于帶方桿的閥線性或45°轉角安裝，適應性強?？梢源怪卑惭b，也可以水平安裝。
The installation size of the bottom conforms to the international standard ISO5211 / DIN3337, The holes are double square so that it’s easy to fix the linear or 45°corner valves attached square bar, adaptable. It can be installed vertically, and also can be installed level.
2.11線路Circuitry
控制線路符合單相或三相電源標準，線路布置緊湊合理，接線端子可有效滿足各種附加功能的要求。
Control circuit conforms to the single-phase or three-phase power supply standard, reasonably compact line layout, wiring terminals can effectively satisfy a variety of additional functional requirements.
3．性能參數 Performance Parameter
|
型號
Model
|
*大輸出扭矩
N·M
|
動作時間90°Operating (S)
|
輸出軸(mm)
Output axis
|
電機
Motor
(W)
|
單相額定電流
Single-phase rated current（A）50HZ
220V(A)50HZ
|
重量
Weigh
(kg)
|
|
方
Square
|
深
Deep
|
圓Round
|
深
Deep
|
|
E-005
|
50
|
30
|
11×11
|
15.5
|
Φ12.6
|
26
|
10
|
0.25
|
3.6
|
|
14×14
|
18
|
|
E-008
|
80
|
30
|
11×11
|
15.5
|
Φ15.7
|
26
|
10
|
0.25
|
3.6
|
|
14×14
|
18
|
|
E-010
|
100
|
30
|
14×14
|
18
|
Φ15.7
|
28
|
15
|
0.35
|
4.6
|
|
17×17
|
22.5
|
Φ18.95
|
28
|
|
E-015
|
150
|
30
|
14×14
|
18
|
Φ18.95
|
28
|
15
|
0.37
|
4.6
|
|
17×17
|
22.5
|
|
E-020
|
200
|
30
|
22×22
|
26
|
Φ22.13
|
45
|
45
|
0.3
|
13
|
|
E-030
|
300
|
30
|
22×22
|
26
|
Φ28.48
|
45
|
45
|
0.31
|
13.4
|
|
E-040
|
400
|
30
|
22×22
|
26
|
Φ28.48
|
45
|
60
|
0.33
|
13.8
|
|
E-060
|
600
|
30
|
27×27
|
32.5
|
Φ31.65
|
45
|
90
|
0.33
|
14
|
|
E-080
|
800
|
45
|
27×27
|
32.5
|
Φ31.65
|
45
|
180
|
0.47
|
14.3
|
|
E-100
|
1000
|
135
|
27×27
|
32.5
|
Φ31.65
|
45
|
180
|
0.47
|
14.5
|
|
E-160
|
1600
|
135
|
Max φ45
|
深65
|
180
|
0.85
|
60
|
|
E-200
|
2000
|
135
|
Max φ45
|
深65
|
180
|
0.85
|
60
|
|
E-300
|
3000
|
135
|
Max φ45
|
深65
|
180
|
0.85
|
60
|
|
|
|
|
|
|
|
|
|
|
|
|
4．標準技術參數 Standard Technical Parameter
|
外殼Shell
|
鋁合金外殼，防水級別：IP67,NEMA4 and 6
Aluminium alloy Shell, waterproof leve:IP67,NEMA4 and 6
|
|
|
電機電源Power supply
|
110/220V AC 1Phase,380/440V AC 3Phase, 50/60Hz, ±10%
|
|
|
控制電源Control supply
|
110/220V AC 1Phase，50/60 Hz, ±10%
|
|
|
電機Motor
|
鼠籠式異步電機Squirrel-cage Asynchronous Motor
|
|
|
限位開關Limit switch
|
2 X 開（Open）/關（Close），SPDT,250V AC 10A
|
|
|
輔助限位開關
Additional Limit switch
|
2 X 開（Open）/關（Close），SPDT,250V AC 10A
|
|
|
行程Travel angle
|
90°～270°±10°（90°以上提前說明）
When it’s over 90°,please note us in advance
|
0°～270°
|
|
失速保護/操作溫度
Stall protection/
Operating temperature
|
內置熱保護，開120℃ ±5℃/關97℃ ± 5℃
Built-in thermal protection, On 120℃ ±5℃/Off 97℃ ± 5℃
|
|
|
指示器Indicator
|
連續的位置指示Continuous situation indication
|
|
|
手動操作Manul operation
|
機械手柄Mechanical handle
（可選裝手輪Optional:fixing with the handwheel ）
|
|
|
自鎖裝置
Self-locking device
|
蝸輪，蝸桿機構提供自鎖
Provide self-locking by worm and worm gear
|
|
|
機械限位
Mechanical Limit
|
2個外部調整螺栓2 external adjustable screws
|
|
|
干燥器Space heater
|
7-10W (110/220V AC)防冷凝Anti-condensation
|
|
|
接線孔Conduit entries
|
2個(Pieces) M18
|
|
|
環境溫度
Ambient temperature
|
-20℃--+70℃
|
|
|
潤滑Lubrication
|
鋁基潤滑脂（EP型）Grease moly（EP tyte）
|
|
|
材料Material
|
鋼,鋁合金，鋁青銅，聚碳酸脂
Steel, Aluminium alloy, Aluminium bronze, Polycarbonate
|
|
|
環境濕度
Ambient humidity
|
*大(Max) 90％ RH
|
非凝結Non-Condensing
|
|
抗震性能Anti-vibration
|
X Y Z 10g,0.2～34 Hz,30分(minutes)
|
|
|
外涂層External coating
|
干粉，環氧聚酯Dry powder, Epoxy polyester
|
